Skip to main content
TAGS

Taupō CVSC As-Built Upload to AWM

Corridor Solutions uploaded the as-built data for 456 assets across 26 asset classes to NZTA's AWM for the new Taupō Commercial Vehicle Safety Centre.

The Taupō Commercial Vehicle Safety Centre (CVSC) is a purpose-built facility on the state highway network. Our client, Cambridge Excavators Limited (CAMEX), constructed it. Once built, the centre's assets had to be recorded accurately in NZTA's asset management database, AWM (previously RAMM), so they can be managed, maintained and renewed over their lifetime.

CAMEX engaged Corridor Solutions to take the as-built data and get it into AWM correctly.

The challenge: a unique mix of assets

The CVSC is not a typical piece of state highway. It combines a distinctive mix of assets, from pavements, drainage and signs through to lighting, electrical equipment and a weigh site. Few sites bring that many asset types together in one place.

That meant working closely with both CAMEX and NZTA. The upload had to be right for the centre itself, and it also had to ensure the adjacent state highway data was not affected.

Our approach

We worked through the as-built drawings and CAMEX's data systematically, in three steps:

  • New centre lines - We worked with NZTA to create new centre lines that represent the roads within the CVSC. This kept the centre's data separate from the surrounding state highway network.

  • Validation against AMDS - We checked the data CAMEX had provided against NZTA's Asset Management Data Standard (AMDS) and made updates where needed so that every value met the standard.

  • Upload to AWM - We uploaded the validated as-built data, 456 assets across 26 asset classes.

The asset classes covered the full breadth of the centre: pavement and surfacing, drainage, signs and markings, lighting, electrical and ducting, barriers, and more.

Results and lessons

This was the most complex upload our team had undertaken at the time, given the number of asset classes and the uniqueness of some of the assets. Working methodically through the data and the as-built drawings, we completed the project successfully in April 2026. NZTA has since praised the project team for the thoroughness of the upload.

It was also our first upload using the AMDS. Our previous work on managing AMDS migrations gave us a thorough understanding of the standard, which we drew on throughout this project.